FINLIP FAQs

Click here for the current product catalog.

Finlip was developed in collaboration with the company AGS-systems srl The company has been manufacturing aluminum systems for minimalist interior design for almost 20 years and distributes them in over 50 countries. A few years ago, some markets recognized the trend away from baseboards in interior design and toward minimalist solutions (e.g., silicone joints). Today, the use of silicone to finish high-quality floors is common in most countries. After many discussions about the advantages and disadvantages of silicone joints and similar solutions, Finlip was developed in collaboration with customers, partners, and suppliers until it was ready for the market and is now sold by the company of the same name.

All available products can be delivered directly to all countries within the European Union. For deliveries outside the EU, please contact us.

If the product and the desired quantity are available, the delivery time is approximately 14 days.  

One box of Easyflex Finlip contains 25 metres of product. This quantity is sufficient for an area of approximately 30 m².

Product prices are visible after logging in. If you have not yet registered, please click here and log in. For special discounts, please send a message via the user area. 

Yes, different discount levels are available. For more detailed information, please send us a message through the user area, use our contact form, or send us an email. 

Click here for the technical data sheet.

Finlip is suitable for joint widths of 5 (±1) mm.

The joint must have a minimum height of 8 mm.

Yes, please contact us in advance to enquire about delivery times and minimum order quantities.

We believe in short distances and try to keep added value within the EU by working with local and regional partners. The majority (over 90%) of our products are manufactured in Italy.

Under normal use, FINLIP retains its color and does not discolor. The material is UV-resistant. As with any surface, however, dirt and marks may be more noticeable depending on the color and level of use..

Yes. FINLIP can be used with all common types of flooring, including glue-down vinyl and vinyl flooring. The joint must be at least 8 mm deep and 4–6 mm wide.

Yes. Private customers can purchase FINLIP through our partner companies and their online shops. You can find an up-to-date overview of all our distribution partners here: Our Reseller | FINLIP

Yes. FINLIP is suitable for use with underfloor heating systems.

Yes. The joint must be 8 mm deep and 4–6 mm wide. We recommend having the existing joint checked by a professional installer beforehand or testing the installation with a sample.

For a perfect result, we recommend walls that are as straight as possible and smoothly plastered. Minor irregularities can easily be compensated for with FINLIP, while larger uneven areas should be corrected before installation.

FINLIP is designed for use in dry indoor environments. When installed correctly, FINLIP creates a clean finish between the wall and floor and minimises the risk of moisture getting behind it. As with any floor-to-wall connection, standing water should be avoided and any spills should be removed promptly.

Yes. However, we do not recommend using FINLIP inside showers or in areas that are regularly exposed to water. Areas subject to permanently standing water must always be avoided.

Custom colors can be produced to order based on individual specifications. Please note that custom colors may have slightly longer lead times.

Our currently available standard colors can be found on our website or through our authorised distribution partners.

FINLIP can be cleaned with a soft cloth and standard mild cleaning products. Abrasive or aggressive cleaning agents and harsh cleaning methods should be avoided.

FINLIP is designed for everyday use in residential and commercial environments. Normal day-to-day loads and impacts do not pose a problem. As with any surface, however, strong mechanical impacts should be avoided.

Yes. FINLIP has a very low profile and, in most cases, does not interfere with placing furniture directly against the wall.

No. FINLIP provides the visible finish for the expansion joint, so additional silicone sealing is not required.

Yes. Dogs and cats can use areas with FINLIP without any issues in everyday life. Normal wear and tear caused by pets does not pose a problem.

FINLIP creates a modern, minimalist look without a surface-mounted skirting board. Furniture can be positioned flush against the wall, while the room appears calmer, cleaner and more architecturally refined.

No – quite the opposite. Installation is simple and quick. As with any installation, careful planning is required, and FINLIP should be taken into account when the flooring is being installed. For a professional installer, however, the installation is straightforward and delivers a high-quality, long-lasting result.

Yes. FINLIP can also be used with tiled floors. The key requirement is that the necessary joint between the floor and wall is provided and that the technical installation requirements are followed.

Yes. FINLIP can be used with a wide range of flooring types, including parquet, laminate, vinyl and design flooring. It is always important to ensure that the perimeter joint is correctly formed in accordance with the requirements of the flooring system.

Yes, FINLIP can generally also be used with floating floors. However, we recommend fully bonded flooring. In all cases, proper planning and professional installation of the flooring are essential.

FINLIP can be used with common types of wall construction, including plastered walls, drywall, timber walls and concrete walls. The surface must be clean, dry and suitable for installation.

As with any high-quality wall finish, a properly prepared substrate is important. FINLIP can compensate for minor irregularities. In the case of significant unevenness, the substrate should be properly prepared before installation.

FINLIP can be precisely adapted to both inside and outside corners. The supplied cutting template allows for accurate cuts, ensuring a clean and precise finish.

At doorways, FINLIP is precisely adapted to the individual situation. This creates a continuous, high-quality transition without a visible traditional skirting board.

Yes. FINLIP can be removed. How easily this can be done depends on the specific conditions on site.

No. FINLIP was designed to make cleaning easy. Since there is no protruding skirting board, there are no surfaces where dust and dirt can accumulate.

Yes. The material has been developed for long-term use and offers a high level of colour stability.

When installed correctly, FINLIP remains securely integrated. Proper substrate preparation and installation in accordance with the installation instructions are essential.

Yes. The absence of a visible skirting board creates clean, uninterrupted lines and can make rooms appear calmer, more spacious and more open.

A standard utility knife is all that is required for installation.

Yes. FINLIP is suitable for both new-build and renovation projects, provided that the floor build-up and existing structural conditions allow for installation.

Yes. FINLIP is suitable for both new-build and renovation projects, provided that the floor build-up and existing structural conditions allow for installation.

This depends on the existing conditions. When renovating, it should be checked whether the required joint dimensions are available: 4–6 mm wide and 8 mm deep.

The wall should be plastered all the way down to the floor and must be clean, dry and free from any loose or friable material. Proper substrate preparation is essential for achieving a clean, high-quality finish.

FINLIP is developed and manufactured according to defined quality standards. For further information, please refer to the technical documentation. If you have any questions, please feel free to contact us.

Yes. However, for an optimal result, we recommend consulting one of our partners and, ideally, having FINLIP installed by a professional.

Yes. Interested customers and partners can request samples directly from FINLIP or through our authorised distribution partners.

We are always open to discussions about possible collaborations. Simply contact us via your user area or send us an email.

We are always open to discussions about possible collaborations. Simply contact us via your user area or send us an email.